8 ton (72kN) ram force and 24 inch (610mm) throat depth with adjustable ram retract position. Reliability/energy efficiency of a fully hydraulic machine. Equipped with Haeger’s patented safety system. Tooling Protection System and Batch Counter. 4 Station Automatic Lower Tool Changer An integrated cartridge with 4 tooling stations automatically retracts, indexes and positions up to 4 different tools in the lower tool holder. Maximum accessibility around the lower tool allows for parts with tall flanges to fit on the machine. 4 Station Automatic Upper Tool Changer 4 Insertion Stations and 4 Tool positions (total of 8 pre-programmed positions) provide the ability to automatically feed up to 4 different sizes and types of fasteners in one handling. Productivity of 1 insertion every 2.5 seconds, while tools are changed within 3 seconds. Fastener Detection and Fastener Length detection provides FULL process control in every station. Fast & Easy Tooling Setup on 4 MAS 350 - Modular Autofeed Systems A unique new drive system in combination with a complete new bowl design incorporating all the latest bowl feeding technologies. Tool Change from 3 minutes to 3 seconds per MAS 350 through a one piece tool module. No more manual bowl setting required. Software automatically sets the proper vibration rate, air eject time and required air pressure to allow for failure free fastener feed. ‘From a full bowl down to the last one out!’ Reliable Feeding. Faster Changeover. No Training Required. Larger bowl design in combination with new drive allows for fastener sizes M1.5 through M10 all to be fed in the same bowl. Deeper bowl design in combination with new bowl tooling design allows for fastener lengths up to 40mm all to be fed in the same bowl. New drive design allows for a 1 single tool piece, resulting in faster and easier tool change. Change in bowl material resulting in fasteners becoming less dirty from ‘air-dust’ or individual rubbing. Lower mounting position allowing for easier filing and emptying. Integrated Tooling Storage Easy and transparent storage of Multi-Modules for the MAS-350 Auto Feed System in combination with separate storage for the Shuttle Modules and upper and lower tools. Both storage positions located where you need the tooling, eliminating unnecessary searching and walking around allowing faster and easier tooling changeovers. Easier and Faster Programming The ALL NEW intuitive Version 10 Insertion Logic TM Software with Insertion Graphics® and integrated Statistic Process Control allows for more functionality while reducing programming time. V10 Insertion Logic® provides you with the recommended operating time for the part programmed and stores any corrected errors during the insertion process, allowing you to provide this data with your deliveries to your customers. Energy Saving New Variable Speed Hydraulics reduces energy consumption up to 30% compared to conventional hydraulic systems. Operator Ergonomics Operator control pendant can be adjusted in 6 directions, allowing for easy access and the best view of screen instructions while standing up or sitting down.
The new 824 WindowTouch-4e brings you: Easier and faster tooling setup combined with the most reliable fastener feeding. Best workpiece accessibility. Easier and faster programming. Best Operator Ergonomics. Energy Saving. 8 ton (72kN) ram force and 24 inch (610mm) throat depth with adjustable ram retract position. Reliability/energy efficiency of a fully hydraulic machine. Equipped with Haeger’s patented safety system. Tooling Protection System and Batch Counter. T-Bracket and Shuttle with integrated Connectors eliminating alignment challenges. Fastest and easiest setup in the industry, reduced from 2 minutes to 10 seconds without having to think about which connector goes where. On traditional machines, an operator had to change multiple air-lines and sensor cables, unnecessarily delaying changeover times. In addition, operators required training for alignment of the T-Bracket and shuttle, which has been eliminated with this new system. New re-designed Shuttle Plate Jaw Pins, eliminating breakage and saving cost for replacement and downtime. A pre-aligned base plate allows for easy tool holder changeover. No alignment of tools required. Where a tooling re-alignment after tool holder replacement used to take up to 5 minutes, this setup time has now been completely eliminated. Lower Support Arm: 200mm more access on lower support arm. Through the use of built-in reinforcements and a change in frame design, the 824 WindowTouch-4 now offers more accessibility on the lower support arm. The ‘Star Design’ Turret Insertion System (TIS) allows for access in ‘U-Shaped profies’. Compared to a round Turret Design, the Star Design offers maximum accessibility for a variety of pre-formed work pieces. The Turret Insertion System clamps the tools in position while providing Position Feedback, eliminating the famous ‘missing fastener’ error. The turret arms are individually removable, allowing for even more access while the position feedback (and process control) remains present. Energy Saving: New variable speed hydraulics reduce energy consumption up to 30% compared to conventional hydraulic systems. Easier and faster Programming: The ALL NEW intuitive Version 10 Insertion Logic® Software with Insertion Graphics and Integrated Statistic Process Control allows for more functionality while reducing programming time. V10 Insertion Logic® provides you with the recommended operating time for the part programmed and monitors and stores any corrected errors during the insertion process, allowing you to provide this data with your deliveries to your customers. Automatic Tooling: Upper Tools, Lower Tools and Shuttle Plates are compatible with previous Haeger machine models. The One-Piece Multi-module for the MAS-350 Autofeed System reduces total components per set from 5 to 4. Shuttle Standoff Set, Shuttle Nut Set, ABFT (Automatic Bottom Feed) Set. MAS 350 – new Modular Autofeed System: A unique new drive system in combination with a complete new bowl design incorporating all the latest bowl feeding technologies. Tool Change reduced from 3 minutes to 3 seconds through a one piece tool module. No more manual bowl settings required. Software automatically sets the proper vibration rate, air eject time and required air pressure to allow for failure free fastener feed. ‘From a full bowl down to the last one out.’ Reliable Feeding. Faster Changeover. No Training Required. Larger bowl design in combination with new drive allowing for fastener sizes M1.5 through M10 all to be fed in the same bowl. Deeper Bowl design in combination with new bowl tooling design allowing for fastener lengths up to 40mm all to be fed in the same bowl. New drive design allows for a 1 single tool piece, resulting in faster and easier tool changes. Change in bowl material resulting in fasteners becoming less dirty from ‘airdust’ or individual rubbing. Lower mounting position allowing for easier filing and emptying.
Haeger 824 MSPe
Haeger 824 oneTouch-4e LITE
Haeger 824 oneTouch-4e
Tooling, Spares, Servicing & Repair
For all your Haeger spares and tooling requirements including customised tooling set- ups, we can help. Give us a call and we will have a service engineer call you back to discuss your exact requirements. Do you need your Haeger press servicing or repairing? We have a man that can! No matter what condition your press is in, a Haeger certified technical service engineer is on hand to get you back up and running. With full UK coverage, give us a call for a no obligation, repair or service quotation.
Haeger 618 MSPe
6 ton (53Kn)  ram force and 18 inch (450mm) throat depth with adjustable ram retract position. Reliability/energy efficiency of a fully hydraulic machine. Equipped with Haeger’s patented safety system. Tooling Protection System and Batch Counter. Optional Positive Stop System: The Positive Stop System provides an easily adjustable method of precisely maintaining the stopping point of the machine cylinder. The system is particularly well suited for improving uniformity on soft, delicate work pieces. It is also effective when inserting small hardware. In addition to aluminium, the system also provides excellent insertion results on a wide variety of softer materials such as fibreglass, printed circuit boards, and many plastic or composite materials. Optional MAS 9 or MAS 350 Modular  Autofeed System: Pick either feed system based on which type of auto tooling you prefer. The maximum stud & standoff lengths are up to 30mm. Built-in Tooling Protection System (TPS) is designed to protect both the tooling and the work piece from damage.
Force Range: Repeatability: Throat Depth: Stroke Length: Adjustable up stroke: Oil Tank Reservoir: Hydraulic pump motor: Electrical: Weight: Footprint Dimensions: Fastener Range: Clinching Capability:
3.6Kn to 53Kn +/- 2% of force setting 450mm 0 to 200mm 10 – 150mm 39 litres 2 HP 200v to 575v 3 phase 50 or 60hz. 7100Kg (LxWxH) 1143mm x 864mm x 2388mm M2 to M8 1mm to 6mm combined thickness
8 ton (72kN) ram force and 24 inch (610mm) throat depth with adjustable ram retract position. Reliability/energy efficiency of a fully hydraulic machine. Equipped with Haeger’s patented safety system. Tooling Protection System and Batch Counter.   Optional Positive Stop System: The Positive Stop System provides an easily  adjustable method of precisely maintaining the stopping point of the machine cylinder. The system is particularly well suited for improving uniformity on soft, delicate work pieces. It is also effective when inserting small hardware. In addition to aluminium, the system also provides excellent insertion results on a wide variety of softer materials such as fibreglass, printed circuit boards, and many plastic or composite materials. Optional MAS 9 or MAS 350 Modular Autofeed System: Pick either feed system based on which type of auto tooling you prefer. The maximum stud & standoff lengths are up to 30mm. Built-in Tooling Protection System (TPS) is designed to protect both the tooling and the work piece from damage.
Force Range: Repeatability: Throat Depth: Stroke Length: Adjustable up stroke: Oil Tank Reservoir: Hydraulic pump motor: Electrical: Weight: Footprint Dimensions: Fastener Range: Clinching Capability: Speed:
3.6KN to 72kN (Optional 90kN modification available) +/- 2% of force setting 610mm 0 to 220mm 10 – 150mm 83 litres 5 HP 200v to 575v 3 phase 50 or 60hz. 7100Kg (LxWxH) 1499mm x 966mm x 2388mm M2 to M12 1mm to 6mm combined thickness Up to 2000 insertions per hour
Haeger 824 WindowTouch-4e
Force Range: Repeatability: Throat Depth: Stroke Length: Adjustable up stroke: Oil Tank Reservoir: Hydraulic pump motor: Electrical: Weight: Footprint Dimensions: Fastener Range: Clinching Capability: Speed:
3.6KN to 72kN (Optional 90kN modification available) +/- 2% of force setting 610mm 0 to 220mm 10 – 150mm 83 litres 5 HP 200v to 575v 3 phase 50 or 60hz. 7100Kg (LxWxH) 1499mm x 966mm x 2388mm M2 to M12 1mm to 6mm combined thickness Up to 2000 insertions per hour
Haeger 824 WindowTouch Fastener Insertion Press for Self-Clinching Fasteners and Rivet Bushes. Haeger 618 Fastener Insertion Press for Self-Clinching Fasteners and Rivet Bushes. Haeger 824 Fastener Insertion Press for Self-Clinching Fasteners and Rivet Bushes. Haeger 824 oneTouch Fastener Insertion Press for Self-Clinching Fasteners and Rivet Bushes.
8 ton (72kN) ram force and 24 inch (610mm) throat depth with adjustable ram retract position. Reliability/energy efficiency of a fully hydraulic machine. Equipped with Haeger’s patented safety system. Tooling Protection System and Batch Counter. The new 824 oneTouch 4e LITE brings you: All the advantages of the 824 WindowTouch-4e. A second Automatic Upper Station which changes the upper tools and insertion stations automatically. Combine the full versatility of Haeger’s 824 WindowTouch 4e with the productivity of the 824 OneTouch 4e. Enjoy fastener detection and stud and standoff length detection on 2 stations. Easy and Fast Changeover to full 824 WindowTouch 4e Versatility. The dual station Upper Tool changer features integrated connectors allowing for a 10 second changeover to any other tooling set-up. No training required.
Haeger 824 oneTouch Lite Fastener Insertion Press for Self-Clinching Fasteners and Rivet Bushes.
Force Range: Repeatability: Throat Depth: Stroke Length: Adjustable up stroke: Oil Tank Reservoir: Hydraulic pump motor: Electrical: Weight: Footprint Dimensions: Fastener Range: Clinching Capability: Speed:
3.6KN to 72kN (Optional 90kN modification available) +/- 2% of force setting 610mm 0 to 220mm 10 – 150mm 83 litres 5 HP 200v to 575v 3 phase 50 or 60hz. 7100Kg (LxWxH) 1499mm x 966mm x 2388mm M2 to M12 1mm to 6mm combined thickness Up to 2000 insertions per hour
Force Range: Repeatability: Throat Depth: Stroke Length: Adjustable up stroke: Oil Tank Reservoir: Hydraulic pump motor: Electrical: Weight: Footprint Dimensions: Fastener Range: Clinching Capability: Speed:
3.6KN to 72kN (Optional 90kN modification available) +/- 2% of force setting 610mm 0 to 220mm 10 – 150mm 83 litres 5 HP 200v to 575v 3 phase 50 or 60hz. 7100Kg (LxWxH) 1499mm x 966mm x 2388mm M2 to M12 1mm to 6mm combined thickness Up to 2000 insertions per hour
Full UK coverage service and repair of you Haeger Fastener Insertion Press. FULL UK SERVICE & REPAIR COVERAGE NP
NORTHERN PRECISION LTD
Specialist Fasteners for Sheet Metal
+44 (0) 1302 836010
+44 (0) 1302 836012
Tel:
Fax:
sales@npfasteners.com
NP
Contact us You can contact us using any of the methods below. Unit 3 Durham Lane Armthorpe Doncaster South Yorkshire DN3 3FE England +44 (0)1302 836010 +44 (0)1302 836012 sales@npfasteners.com
All rights reserved © Northern Precision Ltd.
NORTHERN PRECISION LTD
Accreditations Northern Precision Ltd operate a quality management system in accordance with ISO 9001:2008. The ISO 9001:2008 standard is recognised worldwide and you can be assured of the benefits of working with a certified company knowing that our management systems are constantly assessed and approved.
Regulatory RoHS|WEEE Compliance REACH Compliance Conflict Minerals Policy Environmental Policy Opening Hours Mon - Fri 08:00 - 17:00
Registered in England & Wales Company number 3275391
V.A.T Registration number GB 684 1384 17
SERVICES & SUPPORT
Quality Service Reliability
HAEGER FASTENER INSERTION PRESSES
Northern Precision Ltd YouTube Channel