NP
Contact us You can contact us using any of the methods below. Unit 3 Durham Lane Armthorpe Doncaster South Yorkshire DN3 3FE England +44 (0)1302 836010 +44 (0)1302 836012 sales@npfasteners.com
All rights reserved © Northern Precision Ltd.
NORTHERN PRECISION LTD
Accreditations Northern Precision Ltd operate a quality management system in accordance with ISO 9001:2008. The ISO 9001:2008 standard is recognised worldwide and you can be assured of the benefits of working with a certified company knowing that our management systems are constantly assessed and improved.
Registered in England & Wales Company number 3275391
V.A.T Registration number GB 684 1384 17
NP
NORTHERN PRECISION LTD
Specialist Fasteners for Sheet Metal
+44 (0) 1302 836010
+44 (0) 1302 836012
Tel:
Fax:
sales@npfasteners.com
Quality
Service
Reliability
Northern Precision Ltd YouTube Channel
Material & Finish
Electro Zinc Plated Steel (ZI) parts are suitable for installation in ductile panels with a maximum recommended hardness of 80 HRB. 300 Series Stainless Steel (A2) parts are suitable for installation in ductile panels with a maximum recommended hardness of 70 HRB. Aluminium (AL) parts are suitable for installation in ductile panels with a maximum recommended hardness of 50 HRB.
Part Number Examples
Part number is made up as follows: (Type)-(Diameter)-(Length)-(Material/Finish code) For example: NFH-3MM-10-ZI (Flush Head Pin-3.0mm diameter-10mm long-electro zinc plated steel) NFH-4MM-15-A2 (Flush Head Pin-4.0mm diameter-15mm long-stainless steel) NFH-5MM-20-AL (Flush Head Pin-5.0mm diameter-20mm long-aluminium)
RoHS REACH COMPLIANT
Info
Self-Clinching Flush Head Pins provide a strong captivated pilot pin or pivot point in thin panels. Utilising a special proven castellated clinch feature, this fastener has excellent push-out characteristics as well as good resistance to side loadings, whilst providing a flush finish on the underside of the panel, meaning that minimal surface finishing is required after installation. Like all self clinching fasteners they are installed using a parallel squeezing action, so require access to both sides of the panel.   Flush Head Pins are available in a range of diameters and lengths, manufactured from electro zinc plated through- hardened steel, 300 series stainless steel, aluminium and are suitable for installation in ductile panels with a recommended maximum hardness of 80 HRB for steel parts, 70 HRB for 300 series stainless steel parts and 50 HRB for aluminium parts.
Dimensional
P ±0.05
D ±0.40
H Max. (1)
Min. Sheet Thickness
Min CL to edge of panel
Hole Size +0.08 -0.0
Pin Diameter
Lengths (L) ±0.40
2.30
6.40
3.00
5.30
1.00
3.50
2.30
7.10
4.00
6.00
1.00
4.10
2.50
7.60
5.00
7.50
1.00
5.50
2.70
7.90
6.00
8.00
1.60
6.50
3.00
4.00
5.00
6.00
6
6
-
-
8
8
8
-
10
10
10
10
12
12
12
12
15
15
15
15
-
18
18
18
-
20
20
20
-
-
25
25
Self Clinching Flush Head Pilot Pins
Type NFH
(1) Pin diameter will exceed maximum in this area.
SELF-CLINCHING FLUSH HEAD PINS
self-clinching flush head pins