Self Clinching Flush Head Tapered Pilot Pins

Self-Clinching Fasteners Broaching Fasteners Arnold & Shinjo Fasteners Rivet Bushes Rivet Nuts Weld Fasteners Cage Nuts Blind Rivets Inserts for Plastics Inserts for Stone, Solid Materials, Composites & Sandwich Panels Crown-Nuts Fast-Con Installation Equipment Turned & Cold Formed special parts made to order

Bespoke fastener design & development Fastener & Application testing Technical support ISO 9001 RoHS|WEEE Compliance REACH Compliance Conflict minerals Environmental Policy

OUR PRODUCT RANGE

SERVICES & SUPPORT

SELF-CLINCHING

Clinch Nuts Flush Nuts Blind Nuts Miniature Nuts Nyloc Nuts Locking Nuts Floating Nuts Flush Head Studs Flush Head Studs for Stainless Steel Reduced Flush Head Studs Thin Panel Non-Flush Studs High Strength Studs Thin Panel High Strength Studs Flush Head Pins Flush Head Tapered Pins Concealed Head Studs Through & Blind Standoffs Grounding Standoffs Thin Panel Standoffs Quick Release Standoffs Keylock Standoffs Concealed Head Standoffs Flush Panel Screw Assembly Panel Fasteners Phillips Head Panel Fasteners Low-Profile Panel Fasteners Plunger Assembly Self-Clinching fastener Do’s and Don’ts Self-Clinching fastener problem solving guides Self-Clinch in harder panels

NORTHERN PRECISION LIMITED

Specialist Fasteners

+44 (0) 1302 836010 sales@npfasteners.com

Home

About

Technical

Quality

Contact

News

Contact us You can contact us using any of the methods below. Unit 3 Durham Lane Armthorpe Doncaster South Yorkshire DN3 3FE England +44 (0)1302 836010 sales@npfasteners.com

Home About Technical Quality News Contact

NORTHERN PRECISION LTD

Accreditations Northern Precision Ltd operate a quality management system in accordance with ISO 9001. The ISO 9001 standard is recognised worldwide and you can be assured of the benefits of working with a certified company knowing that our management systems are constantly assessed and approved.

Click here to download our current accreditation certificate.

Regulatory RoHS|WEEE Compliance REACH Compliance Conflict Minerals Policy Environmental Policy Opening Hours Mon - Thu 08:00 - 17:00 Fridays 08:00 - 16:30

Registered in England & Wales Company number 3275391

V.A.T Registration number GB 684 1384 17

Privacy & Cookie Policy

Jump to top of page

Back

Material & Finish

Electro Zinc Plated Steel (ZI) parts are suitable for installation in ductile panels with a maximum recommended hardness of 80 HRB. 300 Series Stainless Steel (A2) parts are suitable for installation in ductile panels with a maximum recommended hardness of 70 HRB.

Part Number Examples

Part number is made up as follows: (Type)-(Diameter)-(Length)-(Material/Finish code) For example: NTP-3MM-10-ZI (Tapered Pin-3.0mm diameter-10mm long-electro zinc plated steel) NTP-4MM-15-A2 (Tapered Pin-4.0mm diameter-15mm long-stainless steel)

Info

Self-Clinching Flush Head Tapered Pins provide a strong captivated pilot pin or pivot point in thin panels. Utilising a special proven clinch feature, this fastener has excellent push-out characteristics as well as good resistance to side loadings, whilst providing a flush finish on the underside of the panel, meaning that minimal surface finishing is required after installation. Like all self clinching fasteners they are installed using a parallel squeezing action, so require access to both sides of the panel. Flush Head Pins are available in a range of diameters and lengths, manufactured from electro zinc plated steel, 300 series stainless steel and are suitable for installation in ductile panels with a recommended maximum hardness of 80 HRB for steel parts and 70 HRB for 300 series stainless steel parts.

Installation Guide and Performance Data Downloadable Data Sheet Back

Dimensional

P ±0.05

D ±0.40

H Max. (1)

Min. sheet thickness

Min CL to edge of panel

Hole Size +0.08 -0.0

Pin Diameter

Lengths (L) ±0.40

2.29

6.40